A Dual-Transformer-Based Bidirectional DC–DC Converter of Using Blocking Capacitor for Wide ZVS Range

In order to improve the efficiency of battery charging and discharging in a wide conversion gain, a dual-transformer-based full bridge converter using a block capacitor was proposed. By adding the blocking capacitor in the primary side of one transformer, an extended zero voltage switching (ZVS) range is obtained in a wide output voltage range, which is achieved by regulating the secondary voltage of the transformers to match the output voltage according to the voltage-second balance in both boost and buck modes. Besides, a mirror-symmetrical modulation is introduced in reverse power flow to avoid a limited ZVS range of the traditional dual-transformer converter. The power characteristics and ZVS range are analyzed in detailed. The analysis results and transformer current are compared with the published dual-transformer converter and the conventional dual active bridge (DAB) converter to demonstrate the advantages. Finally, a 300W prototype was built and tested to verify the effectiveness of the proposed converter.