Denoising Wearable Armband ECG Data Using the Variable Frequency Complex Demodulation Technique

We propose a novel electrocardiogram (ECG) denoising technique using the variable frequency complex demodulation (VFCDM) algorithm. We used VFCDM to perform the sub-band decomposition of the noise-contaminated ECG to remove the noise components so that accurate QRS complexes could be identified. The ECG quality was further improved by removing baseline drift and smoothing via adaptive mean filtering. The proposed method was validated on the MIT-BIH arrhythmia database (MITDB) and wearable armband ECG data. For the former, we added Gaussian white noise to the ECG signals at different signal-to-noise ratios and the denoising performance of the proposed method was compared with other denoising techniques. The proposed approach showed superior denoising performance compared to the other methods. We compared the QRS complex detection performance of the noisy to the denoised armband ECG. The performance of the proposed denoising method on the armband ECG resulted in comparable QRS complex detection as that obtained when using Holter monitor ECG signals. This demonstrates that the proposed algorithm can significantly increase the amount of usable armband ECG data, which would otherwise have been discarded due to electromyogram contamination especially during arm movements. Hence, the proposed algorithm has the potential to enable long-term monitoring of atrial fibrillation using the armband without the discomfort of skin irritation often experienced with Holter monitors.Clinical Relevance- The proposed ECG denoising method can significantly increase the ECG quality of wearable ECG devices, which are more susceptible to muscle and motion artifacts.