QuickCal: Assisted Calibration for Crystal-Free Micromotes

The single-chip micro mote (SC
$\mu \text{M}$
) is a crystal-free single-chip mote that brings us one step closer to the Smart Dust vision, in particular, as it can communicate with off-the-shelf IEEE802.15.4 and Bluetooth low energy devices. However, before it can be part of such networks, the crystal-free SC
$\mu \text{M}$
chip needs to be able to accurately tune its communication frequency to synchronize to the network. This is a challenge since its onboard RC and LC-based resonating circuits have a drift rate that can be three orders of magnitude worse than crystal-based oscillators typically used in today’s radios. This article introduces QuickCal, a solution that allows an SC
$\mu \text{M}$
chip to self-calibrate against off-the-shelf devices dedicated to assisting with its calibration. We show that an SC
$\mu \text{M}$
chip can self-calibrate against this QuickCal Box in fewer than 3 min. We further validate that once it has self-calibrated, an SC
$\mu \text{M}$
chip can reliably communicate with off-the-shelf IEEE802.15.4 devices. Finally, we demonstrate a heterogeneous network—composed of an SC
$\mu \text{M}$
chip and an OpenMote device—implementing a full 6TiSCH Industrial IoT protocol stack, which uses time synchronization and channel hopping. This is the first time that a crystal-free radio is participating in a channel-hopping-enabled TSCH network.