Rear-Wheel Steering Control for Enhanced Steady-State and Transient Vehicle Handling Characteristics

This paper presents a rear-wheel steering (RWS) control algorithm to enhance the vehicle handling performance without prior knowledge of tire characteristics. A RWS system is a chassis control module that can effectively improve vehicle maneuverability and stability. Since the tire-road friction coefficient is difficult to obtain in real world application, the proposed RWS control algorithm is designed so that it can be implemented without any tire-road information. The proposed RWS control algorithm consists of steady-state and transient control inputs. The steady-state control input is proportional to the driver's steering input for achieving the desired yaw rate gain. The desired yaw rate gain is obtained through an offline optimization that is aimed to minimize the vehicle lateral velocity. The transient control input consists of feedforward and feedback control inputs. The feedforward input is designed to improve transient responses of the yaw rate. Computer simulation studies have shown that a trade-off relationship between overshoot and response time exists when the RWS control input is a sum of the steady-state and feedforward inputs. To compromise this conflict, a feedback input has been designed. The overshoot can be significantly reduced while the response time is slightly changed via the feedback input. The proposed algorithm has been investigated via computer simulations. The simulation has been conducted for step steer and sine with dwell scenarios under various road friction conditions. The performance of a RWS vehicle was evaluated using objective indices. Simulation results show that the proposed algorithm enhances vehicle handling performance.