Analysis of General and Specific Standardization Developments in Additive Manufacturing From a Materials and Technological Approach

Additive manufacturing processes and products are very present in the current productive landscape, and in fact these technologies have been one of the most intensively studied and improved during the last years; however, there is still no defined and homogeneous regulatory context for this field. In this work, a thorough review of the main general and specific regulatory developments in design, materials and processes standards for additive manufacturing has been carried out, with special attention to the standards for mechanical characterization of polymer-based products. In many cases standards developed for other productive contexts are identified as recommended references, and some contradictory trends can be identified when different documents and previous experiences are consulted. Thus, as it is logical considering that all these technologies are involved in an intensive and continuous evolution process, there is a certain lack of clarity regarding the standards to be considered. This work aims to contribute to clarify the current standardization context in additive manufacturing and provide some guidelines for the identification of appropriate standards. The paper also emphasizes that the key for next regulatory developments in mechanical testing is to develop standards that consider particular AM processes along with materials. Moreover, a great gap between available standard about additive technologies based on metallic materials and polymer materials during the last years has been detected. Finally, the provided overview is considered of interest as support for research and practice in additive manufacturing, and both in intensive productive scenarios and for particular users and makers.