3D Room Geometry Inference Using a Linear Loudspeaker Array and a Single Microphone

Sound reproduction systems may highly benefit from detailed knowledge of the acoustic space to enhance the spatial sound experience. This article presents a room geometry inference method based on identification of reflective boundaries using a high-resolution direction-of-arrival map produced via room impulse responses (RIRs) measured with a linear loudspeaker array and a single microphone. Exploiting the sparse nature of the early part of the RIRs, Elastic Net regularization is applied to obtain a 2D polar-coordinate map, on which the direct path and early reflections appear as distinct peaks, described by their propagation distance and direction of arrival. Assuming a separable room geometry with four side-walls perpendicular to the floor and ceiling, and imposing pre-defined geometrical constraints on the walls, the 2D-map is segmented into six regions, each corresponding to a particular wall. The salient peaks within each region are selected as candidates for the first-order wall reflections, and a set of potential room geometries is formed by considering all possible combinations of the associated peaks. The room geometry is then inferred using a cost function evaluated on the higher-order reflections computed via beam tracing. The proposed method is tested with both simulated and measured data.