The Influence of DC Component on the Creepage Discharge Paths in Oil-Pressboard Insulation Under AC-DC Combined Voltage

The main dielectric medium in converter transformers is the oil-pressboard. The valve windings of converter transformers are subjected to AC-DC combined voltage. Creepage discharge is a common defect of oil-pressboard insulation. The degree of the oil-immersed pressboard (OIP) damage is directly affected by different creepage discharge paths. In this study, a needle-plate model was developed to explore different creepage discharge paths in oil-pressboard insulation under AC-DC combined voltage. A high-speed camera was used to record the developmental process of white marks on the OIP. We explored reasons behind the different creepage discharge paths under different voltage types. Results revealed that the creepage discharge path and the degree of OIP damage were influenced by the DC component. Although the damaged OIP in converter transformers may cause catastrophic flashover inside the transformers, it is difficult to replace it. This implies that transformer insulation designers should pay attention to the influence of the DC component on OIP damage. In this study, we used pulse current method to detect discharge patterns. Discharge parameters were then extracted from discharge patterns. We observed that developmental process of white marks corresponded to developmental process of discharge parameters. This suggests that creepage discharges can be diagnosed based on discharge parameters. Based on these conclusions, important information was provided for the on-line monitoring design of transformer insulation status.