Development of a Meal Support Device for Functional Recovery Using EMG Signals | IEEE Journals & Magazine | IEEE Xplore

Development of a Meal Support Device for Functional Recovery Using EMG Signals


A pneumatically driven upper limb supporting device we developed. It consists of two pneumatic cylinders, three linkages, and five joints and supports the upper limb move...

Abstract:

This paper describes a device to support a patient's motion of their upper limbs. The device has three functions in a single system: power assistance, rehabilitation, and...Show More

Abstract:

This paper describes a device to support a patient's motion of their upper limbs. The device has three functions in a single system: power assistance, rehabilitation, and meal support. The former two functions have been described in a previous study. In this paper, designs and evaluations of the meal supporting function considering maintaining residual muscular strength are presented. The mechanical design is based on human body statistical data. The controller consists of an electromyogram signal-based interface used for maintaining muscular strength. We evaluate the effectiveness of the meal supporting mode through some experimentation.
A pneumatically driven upper limb supporting device we developed. It consists of two pneumatic cylinders, three linkages, and five joints and supports the upper limb move...
Published in: IEEE Access ( Volume: 8)
Page(s): 79586 - 79593
Date of Publication: 27 April 2020
Electronic ISSN: 2169-3536

Funding Agency:


References

References is not available for this document.