A Highly Independent Multiband Bandpass Filter Using a Multi-Coupled Line Stub-SIR With Folding Structure

The main problem in designing a multiband bandpass filter (BPF) is making each passband response highly independent, where each bandwidth of multiband BPF can be controlled and adjusted separately. To overcome this problem, this paper proposes a highly independent multiband BPF based on a multicoupled line stub-SIR with a folding structure. The proposed multiband BPF is constructed as a multicoupled line to generate a highly independent inter-passband. Moreover, the multiband performance is produced separately and independently by using three sets of resonators: resonator A1/A2 (R
_A1
and R
_A2
), resonator B1/B2 (R
_B1
and R
_B2
), and resonator C1/C2 (R
_C1
and R
_C2
). The three passband frequencies can be independently arranged and designed. To miniaturize the multiband BPF, a folding structure is also proposed. As a result, the multiband BPF has a compact size that is reduced by over 61.29 % compared to previous structures. The even-odd excitation model and the equivalent circuit model are used to analyze the multiband BPF structure. This BPF is designed for GPS applications at 1.57 GHz, WCDMA (3G) at 1.8 GHz, WLAN (WiFi) at 2.4 GHz, LTE (4G) at 2.6 GHz, and 5G communication at 3.5 GHz. To evaluate and validate the proposed structure of the multiband BPF, the circuits are fabricated and tested. The simulated and measured results of the multiband BPF show good agreement. In conclusion, the proposed multiband BPF structure has a highly independent inter passband response and a compact size.