Passivity-Based Control With Active Disturbance Rejection Control of Vienna Rectifier Under Unbalanced Grid Conditions

In this paper, a practical passivity-based control (PBC) with active disturbance rejection control (ADRC) is proposed to improve performance of the Vienna rectifier under unbalanced grid conditions. In general, the traditional double-loop control based on positive and negative sequence transformation is used in Vienna rectifier under unbalanced grid conditions. However, it could not fundamentally solve the additional time delay caused by the second harmonic filter and loss of performance caused by a linear weighted sum of proportional integral (PI) controller. What’s more, the complexity of the controller is high for the positive and negative sequence currents need to be controlled separately. The PBC is a nonlinear controller based on energy dissipation and it has strong robustness to interference. Further, the line voltage based PBC in inner current loop can deal with the voltage unbalance effectively and easily without negative sequence transformation. To improve the disturbance rejection ability, the ADRC is applied in outer voltage loop, which could overcome PI’s drawbacks of step overshoot and slow response. Under unbalanced grid conditions, the proposed control strategy has good performance, easy implementation and less consuming time with PBC control in inner current loop, and it has strong robustness and fast track performance with ADRC control in outer voltage loop. The detailed mathematical model, control principle and controller design of the Vienna rectifier are thoroughly analyzed. In addition, simulation results based on SIMULINK are also given in the paper. Finally, a downsize 5kW Vienna rectifier prototype is built to validate the correctness and effectiveness of the proposed strategy.