Magnetic Field Sensing Based on Magnetoelectric Coupling of Ampere Force Effect With Piezoelectric Effect in Silver/Poly(Vinylidine Fluoride)/Silver Laminated Composite

With the advantages of large piezoelectric constant, wide frequency response range and good flexibility, Poly(vinylidine fluoride) (PVDF) is receiving heightened attention as a promising alternative to traditional piezoelectric materials. This paper focuses on investigating the magnetoelectric effect of a three-layer composite consisting of a core layer of PVDF and two layers of silver-plated electrodes under the action of AC and DC magnetic fields. The resonance frequency of the measurement system is firstly determined to obtain the maximum magnetoelectric response. Then, the existence of magnetoelectric effect in the laminated sample is further verified, which is realized through the coupling of the piezoelectric effect and the Ampere forces caused by the eddy current under the DC bias magnetic field. The experimental results show that the magnetoelectric voltage has an excellent linear response to both AC and DC magnetic fields. The magnetoelectric voltage coefficient is obtained as 299.97 mV/cm·Oe at the resonance frequency under the DC magnetic field of 1000 Oe amplitude. Besides, the theoretical model of the magnetoelectric energy conversion is established, which matches well with the experimental results. Consequently, both AC and DC magnetic field sensing can be realized by observing the magnetoelectric voltage. Without requiring a magnetostrictive phase and power supply, the three-layer composite with a considerable magnetoelectric effect is promising for the application of online monitoring sensors used in the smart grid.