An Alternative Approach for High Uniformity Distribution of Indoor Lighting LED

A high accurately theoretical analysis for high uniformity illumination distribution on the ceiling of indoor lighting LED system based on the super-positions is proposed and performed. Starting from the non-uniform illumination distribution of two LED sources, the dependences of the uniformity ratio on the height of the LED source and the length of the ceiling are investigated. The low intensity in the region near the side-wall can be avoided by rotating the LED source with a small angle, but the low uniformity illumination distribution at the center of the ceiling still exists. The aim of this work proposes the alternative design and approach for several configurations and demonstrates that can be obtained high uniform illumination distribution. The redistributed factor of the illumination through the lens is also considered and calculated. The investigation of this work will be a general guideline for designing the high uniform LED indoor lighting systems as well as being valuable materials for the LED lighting manufacturing industry.