Modeling and Simulation of Vehicle-Mounted Double-Arm Hedgerow Machine

In order to improve the work efficiency and single function of the hedge trimming machine, this subject innovatively designs a vehicle-mounted double-arm hedge machine. It can trim the top and one side of the green belt at the same time. Real-time adjustment of the trimming angle and width can also trim the highway slope. Using SOLIDWORKS to establish the whole machine model and ADAMS to carry out simulation analysis on the model. The height of the cutting tool off the ground, the horizontal displacement and the load of each hydraulic cylinder in the process of movement are calculated. The rationality of the whole machine motion is verified, and the prototype is made based on the model and simulation results. The on-site operation proves that the designed vehicle-mounted double-arm hedge trimmer is feasible and innovative.