Synthesis of Exfoliated Graphene as Anode Material using a Modified Electrochemical Process

Due to its excellent properties, such as superior electrical conductivity and large surface area, graphene has been extensively studied for its application as anode material for lithium battery application. Graphene fabrication via the electrochemical exfoliation route is promising due to the low-cost and straightforward process. Herein, we added a pretreatment of graphite sheet raw material using the immersion process in H
₂
SO
₄
/H
₂
O
₂
mixture to pre-intercalate graphite before the exfoliation process. Pre-treatment time in the constant H
₂
SO
₄
/H
₂
O
₂
volume ratio was optimized to obtain the best electrical conductivity and charge transfer resistance. On the prepared samples, the optimum period is 3 minutes, which generates the electrical conductivity of 3298 S m
^-1
. The smallest charge transfer resistance yielded is 55.90 Ohm. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) Spectroscopy were utilized for characterizing the morphology and elemental composition of samples.