Design and Development of Semi-Automatic Electrical Incinerator Using Arduino

Incineration is the key form of treatment for waste-to-energy. The existing incinerator developed is simple in design; it did not consist of a dustbin to store the waste. The waste disposed directly went through the heating chamber with no control technology i.e., the switch of chamber is controlled manually. This disadvantage is covered by our system as the switch is automatically controlled with the use of a controller. Arduino is used to control the sweeping of the valve. Programming is done with various condition to meet the requirement of the proposed work. The system is environmental friendly as it has a chimney with a filter installed in it. With the use of this system it is easier to dispose waste. It is portable as it is a wheel based incinerator. This portable wherein furnace and valve is automatically operated based on Arduino program. System is reliable and efficient as it is wheel based. The most attractive is it has inbuilt smart dustbin in it. About 65-80% of the energy content in the organic substances can be utilize to produce electricity.