Mode Selective Conversion Enabled by the Long-Period Gratings Inscribed in Elliptical Core Few-Mode Fiber

We demonstrate the fabrication of long-period fiber gratings (LPFGs) in an elliptical core few-mode fiber (e-FMF) by CO
₂
laser. The mode conversion from fundamental mode to high-order modes (LP
_11a
, LP
_11b
, and LP
_21a
mode) can be realized by the LPFGs with high efficiency of more than 95%. The effect of bending, torsion, temperature, and strain on the resonance wavelength of the e-FMF based LPFG mode converters are experimentally investigated. The temperature and strain sensitivities of the LPFGs are characterized to be -36 pm/°C and -4.9 pm/με, and the LPFGs are found to be insensitive to the bending and torsion. Due to the existence of trench in the e-FMF, the higher-order LP
₀₂
and LP
_31a
mode can also be stimulated by the e-FMF based LPFGs with a grating period of 515 μm and 400 μm, respectively. The proposed e-FMF based LPFGs could have a promising prospect in the application of fiber sensing and mode division multiplexing optical communication system.