Accurate Near-Field Millimeter-Wave Imaging of Concave Objects—A Case Study of Dihedral Structures Under Monostatic Array Configurations

With the fast progress of high-resolution microwave and millimeter-wave (MMW) near-field imaging systems, image artifacts caused by complex high-contrast target become a nonnegligible issue for accurate surface reconstruction and recognition. Among different types of artifacts, those caused by high-order scattering within concave structures are particularly difficult to interpret and to correct. This article focuses on analyzing these unconsidered effects in conventional imaging or beamforming algorithms and chooses a typical imaging scenario with dihedral structures under near-field monostatic cylindrical imaging geometry for discussion. The mechanism of multiple reflections and the formation of artifacts are firstly investigated, and the artifacts are classified into two categories based on the number of reflection times. Then shooting and bouncing rays (SBRs) method is utilized to establish an analytical forward model including the mechanism of multiple reflections. Furthermore, a new imaging algorithm based on this forward model is proposed to obtain more accurate reconstructions. By compensating phase shifts of different multiple reflection signals with the corresponding range equations, dihedral-type objects with different opening angles can be accurately recovered. Numerical results are presented to verify the applicability of the forward model and to validate the effectiveness of the proposed imaging algorithm. In the end, experimental results confirm the practicability of the proposed method.