Practical Implementation of Multichannel Filtered-x Least Mean Square Algorithm Based on the Multiple-Parallel-Branch With Folding Architecture for Large-Scale Active Noise Control

Multichannel active noise control (MCANC) is widely recognized as an effective and efficient solution for acoustic noise and vibration cancellation, such as in high-dimensional ventilation ducts, open windows, and mechanical structures. The feedforward multichannel filtered-x least mean square (FFMCFxLMS) algorithm is commonly used to dynamically adjust the transfer function of the multichannel controllers for different noise environments. The computational load incurred by the FFMCFxLMS algorithm, however, increases exponentially with increasing channel count, thus requiring high-end field-programmable gate array (FPGA) processors. Nevertheless, such processors still need specific configurations to cope with soaring computing loads as the channel count increases. To achieve a high-efficiency implementation of the FFMCFxLMS algorithm with floating-point arithmetic, a novel architecture based on multiple-parallel-branch with folding (MPBF) technique is proposed. This architecture parallelizes the branches and reuses the multiplier and adder in each folded branch so that the tradeoff between throughput and the usage of the hardware resources is balanced. The proposed architecture is validated in an experimental setup that implements the FFMCFxLMS algorithm for the MCANC system with 24 reference sensors, 24 secondary sources, and 24 error sensors, at a sampling and throughput rates of 25 kHz and 260 Mb/s, respectively.