2-D Evaluation of Bred Tritium Using Neutron Imaging Plate

Tritium breeding performance of a fusion blanket is a key parameter for the self-sufficient fueling of a fusion reactor, and thus designed to validate the performance of a neutronics experiment. Measuring the 2-D distribution of bred tritium is challenging via conventional methods such as β-ray counting from an irradiated lithium sample using a liquid scintillation counter (LSC) and a single-crystal diamond detector with a thin
⁶
LiF film, because they are point detectors which require many measurements. In this article, 2-D distribution of the low quantity produced tritium was evaluated with a neutron imaging plate (NIP) with a Gd convertor by estimating the loss of neutrons via a capture reaction by Li. Deuterium-deuterium (DD) fusion neutrons were generated using a compact fusion device at an average neutron production rate of 1.5 × 10
⁵
n/s by applying high voltages. A neutron image with “shadows” projected by thermal neutron capture reactions of
⁶
Li(n,α) and
¹⁰
B(n,α) was successfully obtained. The experimentally evaluated values were confirmed to be consistent with the total number of capture reactions calculated using a neutron transport code. The results suggest that the approach could be a facile method for the 2-D evaluation of bred tritium.