LLC Resonant Converter With Damping Split Inductor Improving Light-Load Regulation Ability

LLC resonant converters are widely used in On-board Power Converter but the pumping voltage of traditional LLC converter is unavoidable under light-load conditions due to the existence of parasitic parameter. In this paper, an LLC resonant converter with damping split inductor is proposed to improve the light-load regulation capability. The original resonant inductor is divided into two parts in series. Then, a simple damping resistor connected on one part in parallel and the other part can be integrated into the transformer. Using damping split inductor, significant regulation improvements could be achieved under light-load conditions with not any change in control strategy and almost zero hardware cost. In addition, based on impedance analysis of the resonant tank, the effects of the proposed method are analyzed including voltage gain, soft switching characteristics, suppression of high frequency interference components, and system power loss. Moreover, the detailed design process and optimization conditions of the damping split inductor parameters are carefully illustrated. Eventually, the experimental results demonstrate the characteristics mentioned above for the 96 W prototype at the expense of a maximum increase in device loss of 0.85 W.