Mechanically tunable coupled resonator waveguide bandpass filter

This paper proposes a novel mechanically tunable waveguide filter design, based on a coupled resonator topology. The resonator geometry consists of a rectangular waveguide cavity and a dielectric cylinder. Unlike conventional cylindrical resonators which are made out of a single part, here the cylinders are cut in half. By changing the distance between these two parts, the resonating frequency of the resonator can be changed, which allows for a tunable filter design. A filter using the proposed geometry has a large tuning bandwidth as well as relatively constant passband frequencies. The performance of the proposed filter is demonstrated by evaluating the filter using 3D simulation software CST Studio Suite.