Improving Microgrid Low-Voltage Ride-Through Capacity Using Neural Control

In this article, a neural sliding-mode linearization controller is proposed to regulate the generated active and reactive power for each distributed energy resource in a microgrid. The developed controller is based on recurrent high-order neural network identification, trained online with an extended Kalman filter learning algorithm. Based on such neural identification, adequate models of the microgrid generation units are obtained even in the presence of grid disturbances, which helps the proposed controller to reject disturbances, to ensure stability, and to operate the renewable energy sources under different grid scenarios. The proposed microgrid is composed of a wind power system, a solar power system, a battery bank, and a load demand. In addition, the microgrid under study is interconnected to an IEEE nine-bus system. The whole system is simulated in real time using the Opal-RT (OP5600) simulator. Real-time simulation results illustrate the effectiveness of the proposed control scheme to achieve trajectory tracking of the distributed energy resources active and reactive power even in the presence of grid disturbances.