Bending Analysis of Switchable Frequency Selective Surface Based on Flexible Composite Substrate

In this paper presents a switchable frequency selective surface (FSS) based on composite flexible substrate has been investigated. To make the FSS switchable, various combinations of switches are used. The design is bent E-field and H-field directions over various bending curvatures and the corresponding behavior is analyzed. It is observed that design has less variation when bending is applied along H-field direction. Whereas, slight variations are observed when bending is applied along the E-field direction. It is noted that the design exhibits stop band and pass band characteristics. Furthermore, in pass band it provides single wideband and dual band operations. These characteristics are preserved when bending is applied, thus making it suitable for wearable applications and modern communication systems.