Design of Tri-Band Balanced Filter With Wideband Common-Mode Suppression and Upper Stopband Using Square Ring Loaded Resonator

In this brief, a novel multi-mode square ring loaded resonator (SRLR) is presented, and a tri-band balanced bandpass filter (BPF) with good performances is developed. The multi-mode SRLR consists of a ring resonator and six open stubs, and its resonant characteristics is obtained by the odd/even-mode method. Compared with conventional SRLR, the symmetrical SRLR has more degree of freedom in controlling the resonance modes. Thus, a wide upper DM stopband can be achieved by choosing proper electrical lengths of open stubs. Moreover, frequency dispersion technique is used to enhance common-mode (CM) suppression in the proposed balanced tri-band BPF. By loading a cross-shaped stub and open-loop stub to the center of the first and second order SRLR respectively, five CM transmission zeros (TZs) are produced. Therefore, a wideband CM suppression can be achieved with the DM response almost intact. To verify this design method, a tri-band balanced filter operating at 2.4, 3.5 and 5.2 GHz has been designed, simulated and fabricated. Measured results exhibit good agreement with the simulated ones.