Capacitive Sensor with Stretchable Membrane Fabricated by 3D Printing for Displacement Application | IEEE Conference Publication | IEEE Xplore

Capacitive Sensor with Stretchable Membrane Fabricated by 3D Printing for Displacement Application


Abstract:

In this paper we present two stretchable capacitive sensors which have different diameter of electrodes (20 and 30 mm). For capacitive sensor realizations are used 3D pri...Show More

Abstract:

In this paper we present two stretchable capacitive sensors which have different diameter of electrodes (20 and 30 mm). For capacitive sensor realizations are used 3D printing technology using PLA (all sensor's casings elements) and NinjaFlex (membrane) printing materials. 3D printed sensors are applied for displacement measurement. The experimental results of 3D printed capacitive sensors show that they are suitable candidates for displacement application with two range: linear (from 0 to 1200 μm) and nonlinear (from 1200 μm to 1800 μm).
Date of Conference: 01-04 July 2019
Date Added to IEEE Xplore: 11 October 2019
ISBN Information:
Conference Location: Novi Sad, Serbia

Contact IEEE to Subscribe

References

References is not available for this document.