Hyperspectral imaging for thermal effect monitoring in in vivo liver during laser ablation

Thermal ablation is a minimally invasive technique used to induce a controlled necrosis of malignant cells by increasing the temperature in localized areas. This procedure needs an accurate and real-time monitoring of thermal effects to evaluate and control treatment outcome. In this work, a hyperspectral imaging (HSI) technique is proposed as a new and non-invasive method to monitor ablative therapy. HSI provides images of the target object in several spectral bands, hence the reflectance/absorbance spectrum for each pixel. This paper presents a preliminary and original HSI-based analysis of the thermal state in the in vivo porcine liver undergoing laser ablation. In order to compare the spectral response between treated and untreated areas of the organ, proper Regions of Interest (ROIs) were chosen on the hyperspectral images; for each ROI, the absorbance variation for the selected wavelengths (i.e., 630, 760, and 960nm, for deoxyhemoglobin, methemoglobin, and water respectively) was assessed. Results obtained during and after laser ablation show that the absorbance of the methemoglobin peaks increases up to 40% in the burned region with respect to the non-ablated one. Conversely, the relative change of deoxyhemoglobin and water peaks is less marked. Based on these results, absorbance threshold values were retrieved and used to visualize the ablation zone on the images. This preliminary analysis suggests that a combination of the absorbance information is essential to achieve a more accurate identification of the ablation region. The results encourage further studies on the correlation between thermal effects and the spectral response of biological tissues undergoing thermal ablation, for final clinical use.