Study on the Influence of Switching Impulse Superposition Phase on AC Partial Discharge of Epoxy Surface in SF6 Gas

In this letter, a test platform capable of generating superimposed voltage with controllable phase is presented. Surface partial discharge(PD) of epoxy insulation was measured and analyzed in SF
₆
. The applied voltage is AC and switching impulse superimposed voltage. Results show that only PD of the negative cycles of the AC voltage is excited or accelerated after impulse. With AC voltage at 90% of partial discharge inception voltage(PDIV), AC PDIV is reduced after imposing the switching impulse. When AC voltage is kept at 110% of PDIV, AC PDs are obviously promoted after impulse.