Separation-Misalignment Insensitive WPT System Using Two-Plane Printed Inductors

This letter presents a separation-misalignment insensitive wireless power transfer (WPT) system. This insensitivity is possible by minimizing the variation of mutual inductance. The transmitter (TX) of the proposed WPT system uses a two-plane printed inductor, and the receiver (RX) is a single-plane one. The TX encloses the RX to achieve minimal mutual inductance variations. Hence, the lost mutual inductance due to the misalignment between the RX and one of the TX inductors is compensated by getting close to/moving away from the other TX inductor. Furthermore, admittance inversion and compensation networks are designed to compensate for the remaining variations. Then, we design and fabricate a prototype at 50 MHz. Each TX inductor has an area of 50 mm × 50 mm and an initial separation of 30 mm from the 25 mm×25 mm RX. The measured efficiency ranges between 72.5% and 80.5% for the separation of ±20 mm from the initial position.