Analysis and Design of a Modular 100 kW Stand Alone Power System

The growing number of energy consuming devices, together with the increasing demand for energy, has led to an energy crisis in the world today. As electricity is an important factor for the development in the economic growth. At this time, the growing population will bring disaster situations relating to electrical energy and pollution; it will affect both the economy and the citizens and make a barrier in the path to complete with developed countries. In order to overcome the epileptic situation of electrical energy and make our environment clean and green. First, we need to give opportunities for renewable energy to address electricity generation. Second, there is no other way to reduce complexity and eliminate energy problem without using solar energy. The solar energy which is renewable energy, environmental friendly and free of cost but still we face difficulty by complete harnessing of solar energy because of variation of irradiation and temperature to get constant point at the output we will use PI controller. Moreover, there is different classification of inverter we used "PWM inverter" that can take steady DC voltage PWM inverter can take in a steady dc voltage. So as to feed solar voltage to the boost converter to step-up solar voltage we used PI controller to control boost converter and get constant voltage at the output the we feed this boost DC voltage to the 3phase PWM inverter to converter into three phase AC voltage. Finally, the inverter should direct the extent and the recurrence of AC output voltages, and the diode rectifiers are required to settle the line-to-line voltage.