Functional Failure Rate Due to Single-Event Transients in Clock Distribution Networks

With technology scaling, lower supply voltages, and higher operating frequencies clock distribution networks become more and more vulnerable to transients faults. These faults can cause circuit-wide effects and thus, significantly contribute to the functional failure rate of the circuit. This paper proposes a methodology to analyse how the functional behaviour is affected by Single-Event Transients in the clock distribution network. The approach is based on logic-level simulation and thus, only uses the register-transfer level description of a design. Therefore, a fault model is proposed which implements the main effects due to radiation-induced transients in the clock network. This fault model enables the computation of the functional failure rate caused by Single-Event Transients for each individual clock buffer, as well as the complete network. Further, it allows the identification of the most vulnerable flip-flops related to Single-Event Transients in the clock network.The proposed methodology is applied in a practical example and a fault injection campaign is performed. In order to evaluate the impact of Single-Event Transients in clock distribution networks, the obtained functional failure rate is compared to the error rate caused by Single-Event Upsets in the sequential logic.