Fast Commutation of DC Current Into a Capacitor Using Moving Contacts

This paper describes a method of fast commutation of DC current into a capacitor. Theoretical study is provided, which enables evaluation of commutating DC current for the given contact velocity, capacitance, and dielectric strength. It is concluded that a non-zero contact velocity at separation is required, and a corresponding switch design is proposed. Experimental results on a laboratory setup illustrate successful DC current commutation up to 400 A, with voltages rising to 1.3 kV. Further experiments demonstrate that parasitic parameters reduce the magnitude of the current that can be commutated. A detailed non-linear PSCAD model and a linear model for the parasitic circuit are presented to enable prediction of the success of commutation. The model accuracy is confirmed with experimental tests. The DC current commutation in the proposed method occurs 5-10 μs after the contact separation, which is much faster than with other methods employing moving contacts. A further benefit of the extremely short arcing is the elimination of thermal issues on contacts, and possible simplified design of the mechanical switch.