A Robust Optimal Coordinated Droop Control Method for Multiple VSCs in AC–DC Distribution Network

AC-DC hybrid distribution network is viewed as a featured system to efficiently connect to all kinds of power sources and loads. In order to improve the system robustness, adapting to random fluctuations of renewable energy sources, this paper proposed a robust optimal coordinated control method for multiple voltage source converters (VSCs) in AC-DC distribution network. A robust optimization model was established to co-optimize the slopes of active and reactive power droop control of VSCs with the aim to minimize the total network loss, while ensuring the system security. VSC capacity coupling and power flow constraints were both considered. Then, to enhance the computational tractability of the problem, based on the column-and-constraint generation algorithm, V 2 - P and V 2 - Q were implemented in the droop control schemes holding the linear feedback characteristic so that the non-convex max-min sub-problem can be transformed into a mixed integer second-order cone (SOC) programming problem. Furthermore, to increase the accuracy of SOC relaxation in the sub-problem, a current limit strategy was designed where the maximum possible network loss was pre-identified to restrain the feasible range of branch current. Numerical experiments suggest that the proposed coordinated control method can improve the system security with little extra economic cost, and the reliability of the results is enhanced by the proposed current limit strategy.