Design, Analysis, and Impacts of Sinusoidal LC Filter on Pulsewidth Modulated Inverter Fed-Induction Motor Drive

Squirrel-cage induction motor (SQIM) fed by a pulsewidth modulated voltage source inverter (VSI) is subjected to voltage and current surges. It may cause additional losses in the motor, insulation failure, high bearing current, and electromagnetic interference. To mitigate these problems, sinusoidal LC filter is placed at the ac-side of the VSI. This paper proposes a new methodology to design the filter. In this method, the filter inductance is chosen based on the maximum ripple in the inverter ac-side current and the voltage drop across the filter inductor, and the filter capacitor is chosen based on the steady-state reactive power demand of the SQIM. The effects of the designed filter on the switch current, losses in the drive, temperature of the dc-link capacitor, dv/dt at the motor terminal, stator flux, and air-gap torque of the SQIM are discussed. The performance of the drive with the filters, designed by the proposed method and the standard method, are experimentally tested on a two-level silicon carbide VSI-fed SQIM and comparative analysis is carried out. The impact of the designed filter on the drive is also shown when the neutral point of the filter capacitors is connected with the mid-point of the dc link. The stability of the closed-loop controlled SQIM drive with the proposed filter, and simulation results are presented to verify its performance.