Topology Analysis, Design, and Comparison of High Temperature Superconducting Double Stator Machine With Stationary Seal

This paper proposes a high temperature superconducting (HTS) double stator machine (HTS-DSM), based on the magnetic field modulation principle. In the proposed HTS-DSM, the HTS field winding and the copper armature winding are separately located on the two stators, so that it overcomes the drawbacks caused by the coupling device for cryogenic transfer, the torque tube, the carbon brushes, and slip rings in the conventional HTS synchronous machines with the rotating field winding, bringing the merits of high reliability and low maintenance cost. Moreover, a method of amounting a ferromagnetic ring outside the HTS field winding is also proposed to reduce the negative effects of the armature reaction field on the HTS field winding, since the alternating current (AC) losses induced by the armature reaction field easily cause the quench of the HTS field winding. Totally four different topologies are proposed, and the operation principle of the HTS-DSMs is analyzed based on the magnetic field modulation principle. Then the design and optimization of the HTS-DSM is discussed in detail to present the main design parameters of the four topologies. Finally, the performance of the four different topologies are compared by the finite element analysis, the results reveal that the HTS-DSM with modular dewar and iron-teeth inner stator exhibits the merits of higher power density.