Resonant Bridgeless AC/DC Rectifier With High Switching Frequency and Inherent PFC Capability

Boost-based converters are used in a variety of nonisolated step-up applications, such as power factor correctors, because of their simplicity. The power density of these converters can be increased in higher switching frequencies, which reduces the size of the magnetic elements. This increases the switching losses, but that can be solved by soft-switching techniques. This paper proposes a resonant bridgeless power factor correction converter that provides soft switching for all of the semiconductors. The proposed structure can provide zero voltage switching for the switches and zero current switching for the diodes. In the proposed structure, the input current is inherently sinusoidal with low total harmonic distortion, even with small inductances. Therefore, a high input power factor is achieved without requiring a current control loop in the circuit. This reduces the complexity of the control circuit. An experimental prototype has been constructed to investigate the validity of the claims. Experimental results show near-unity power factor, as well as 2% efficiency improvement at full load when compared to a conventional interleaved boost converter with the same components.