Systematic Co-Design of Matching Networks and Rectifiers for CMOS Radio Frequency Energy Harvesters

This paper presents a systematic methodology for the co-design of matching network and rectifier of radio frequency (RF) harvesters that results in maximum power conversion efficiency (PCE) for a given available power. This method is based on our newly developed rectifier model capable of calculating the CMOS Dickson's rectifier's input/output voltages at a given input power developed for low/high input power regimes. The proposed model allows for the co-design of the matching network and the rectifier in a fraction of time that takes for the design of the RF energy harvester using previously developed models relying on the knowledge of rectifier's input voltage levels where a computationally extensive iterative design procedure must be performed because of the interdependence of the rectifier's input voltage, the input power, and the matching network's and rectifier's parameters. The proposed methodology is capable of accurately predicting matching network components' sizes for both the lossless and lossy matching networks for a maximum power transfer. Utilizing the proposed methodology, the designers can produce efficiency contour plots for a given input power for finding the optimum matching network and rectifier's parameters for maximum PCE. The model, simulation, and measurement results for different parameters and input power levels in a 130-nm process are in good agreement.