CD-Xbar: A Converge-Diverge Crossbar Network for High-Performance GPUs

Modern GPUs feature an increasing number of streaming multiprocessors (SMs) to boost system throughput. How to construct an efficient and scalable network-on-chip (NoC) for future high-performance GPUs is particularly critical. Although a mesh network is a widely used NoC topology in manycore CPUs for scalability and simplicity reasons, it is ill-suited to GPUs because of the many-to-few-to-many traffic pattern observed in GPU-compute workloads. Although a crossbar NoC is a natural fit, it does not scale to large SM counts while operating at high frequency. In this paper, we propose the converge-diverge crossbar (CD-Xbar) network with round-robin routing and topology-aware concurrent thread array (CTA) scheduling. CD-Xbar consists of two types of crossbars, a local crossbar and a global crossbar. A local crossbar converges input ports from the SMs into so-called converged ports; the global crossbar diverges these converged ports to the last-level cache (LLC) slices and memory controllers. CD-Xbar provides routing path diversity through the converged ports. Round-robin routing and topology-aware CTA scheduling balance network traffic among the converged ports within a local crossbar and across crossbars, respectively. Compared to a mesh with the same bisection bandwidth, CD-Xbar reduces NoC active silicon area and power consumption by 52.5 and 48.5 percent, respectively, while at the same time improving performance by 13.9 percent on average. CD-Xbar performs within 2.9 percent of an idealized fully-connected crossbar. We further demonstrate CD-Xbar's scalability, flexibility and improved performance per Watt (by 17.1 percent) over state-of-the-art GPU NoCs which are highly customized and non-scalable.