Imaging With WiFi

A new method of creating microwave imagery by capturing the signals emitted by a small set of wireless WiFi transmitters is presented. The imaging technique leverages the fact that the signals emitted by separate WiFi transmitters are sufficiently statistically independent to create a radiation pattern that is spatially incoherent, enabling the use of spatial frequency sampling using a small set of receiving antennas in a sparse array. In contrast to traditional microwave imaging, this method requires no mechanical or electrical beam scanning and no coordination between transmitters and receivers. Furthermore, the WiFi imaging system requires far less receiver gain than passive microwave imagers and significantly less bandwidth. We experimentally demonstrate the 2-D image reconstruction of reflecting metal spheres and an X-shaped reflecting target using three transmitters emitting independent 16-level quadrature amplitude modulated signals at 5.5 GHz matching commercial WiFi protocols 802.11n/ac.