Control model development using TMS320F28335 microcontroller for high rated inverter and DC motor drive application

This project describes a MATLAB control development in order to be tested in high power inverter and DC motor drive using TI microcontroller. The reason why two tests condition have been conducted is to test the application of inverter in to produce high power for the inverter output while the rectifier to test on the DC motor drive. This project is also to see the effectiveness of the TI controller board which is the TMS320F28335. The main features of this system is the ability of the controller which has been build in the TMS320F28335 for controlling the output current at the inverter and also to control the speed for DC motor application. Therefore, the Proportional Integral (PI) controller is used in those systems in order to ensure the current and speed outputs are same as the reference value that have been set in the Matlab/Simulink. At the end, all the results have shown a good agreement on the PI controller on the feedback response for both applications using TMS320F28335.