Impedance Spectroscopy Based on Linear System Identification

Impedance spectroscopy is a commonly used measurement technique for electrical characterization of a sample under test over a wide frequency range. Most measurement methods employ a sine wave excitation generator, which implies a point-by-point frequency sweep and a complex readout architecture. This paper presents a fast, wideband, measurement method for impedance spectroscopy based on linear system identification. The main advantage of the proposed method is the low hardware complexity, which consists of a three-level pulse waveform, an inverting voltage amplifier, and a general purpose analog-to-digital converter (ADC). A proof-of-concept prototype, which is implemented with off-the-shelf components, achieves an estimation fit of approximately 96%. The prototype operation is validated electrically using known RC component values and tested in real application conditions.