Cross Interference Minimization and Simultaneous Wireless Power Transfer to Multiple Frequency Loads Using Frequency Bifurcation Approach

Simultaneous power distribution to multiple loads using a single source in the wireless power transfer (WPT) system is a challenging issue due to cross-coupling between the load coils, which reduces the power transfer efficiency. In a resonant WPT system, when two or more coils operated under over coupled condition, the original operating resonant frequency gets bifurcated, and thereby reduction in the power transfer efficiency. Different techniques are investigated in the literature to mitigate the frequency bifurcation phenomena in the resonant WPT system. However, the utilization of frequency bifurcation approach for the simultaneous power transfer to multiple loads is not addressed. This paper proposes a simultaneous power transfer approach using frequency bifurcation for the multiple load system designed with different operating frequency. Mathematical, simulation, and experimental studies performed for dual, triple, and four coil WPT systems with multiple loads. In addition, an automatic power flow control method is implemented to estimate the load current from the source, which helps to select a new set of load coils to be charged. The experimental results confirm the proposed power transfer, helps to attain higher power transfer efficiency of 39.34%, 49.31%, 68.22% and cross interference of -31.2 dBV, -36.2 dBV, -41.2 dBV for dual, triple, and four coil WPT system, respectively.