Soft-Switching Voltage-Demultiplier-Cell-Based High Step-Down DC–DC Converter

A novel high step-down dc-dc converter with voltage demultiplier cell is proposed in this paper, which is widely used in the high step-down applications such as electric vehicle and digital circuits. The combination of switched-capacitor and coupled-inductor is employed to build extended voltage demultiplier in the proposed converter, which makes a quite higher voltage conversion ratio than that of the existing counterparts. Thus, the proposed converter can achieve extremely low output voltage with an appropriate duty ratio, and the extreme duty cycle is avoided. Accordingly, voltage stress on power switches is greatly reduced. Then, mosfets with low conduction resistance could be utilized to reduce conduction loss. Importantly, zero-voltage switching could be achieved for the main switch, which promotes the conversion efficiency further. In addition, the coupled inductor operates not only as a filter inductor, but also as a transformer when the main switch is in the off state, which reduces the volume of the magnetic core and improves the power density of the converter. The operation principle, performance analysis, design considerations of the proposed converter and performance comparison with recent counterparts are discussed in detail, and finally, an experimental prototype is built to verify the theoretical analysis and performance of the proposed converter.