ColdFlux Superconducting EDA and TCAD Tools Project: Overview and Progress

The IARPA SuperTools program requires the development of superconducting electronic design automation (S-EDA) and superconducting technology computer-aided design (S-TCAD) tools aimed at enabling the reliable design of complex superconducting digital circuits with millions of Josephson junctions. Within the SuperTools program, the ColdFlux project addresses S-EDA and S-TCAD tool research and development in four areas: 1) RTL synthesis, architectures and verification; 2) analog design and layout synthesis; 3) physical design and test; and 4) device and process modeling/simulation and cell library design. Capabilities include, but are not limited to, the following: device level modeling and simulation of Josephson junctions, modeling and simulation of the superconducting process manufacturing processes, powerful new electrical circuit simulation, parameterized schematic and layout libraries, optimization, compact SPICE-like model extraction, timing analysis, behavioral, register-transfer-level and logic syntheses, clock tree synthesis, placement and routing, layout-versus-schematic extraction, functional verification, and the evaluation of designs in the presence of magnetic fields and trapped flux. ColdFlux consists of six research groups from four continents. Here, we present an overview of the current and planned activities related to the project and justify the design assumptions and decisions that were made to allow the development of design tools for million-gate circuits.