Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding

Ultrasonic bonding and welding are common friction based approaches in the assembly of power electronics. Interconnections with cross-sections of 0.3 mm up to 12 mm made from copper are well suited in high power applications. For increasing friction energy, which is responsible for bond formation, a two-dimensional vibration approach is applied to newly developed interconnection pins. Using two-dimensional vibration for bonding requires identification of suitable bonding parameters. Even though simulation models of wire bonding processes exist, parameters for the two-dimensional pin-bonding process cannot be derived accurately yet. Within this contribution, a methodology and workflow for experimental studies identifying a suitable bond parameter space are presented. The results of a pre-study are used to set up an extensive statistical parameter study, which gives insights about the bond strength change due to bond process parameter variation. By evaluation of electrical data captured during bonding, errors biasing the resulting shear forces are identified. All data obtained during the experimental study is used to build a statistical regression model suitable for predicting shear forces. The accuracy of the regression model's predictions is determined and the applicability to predict process parameters or validate simulation models is assessed. Finally, the influence of the tool trajectory on the bond formation is determined, comparing one dimensional, elliptic and circular trajectories.