Energy intensity of passenger travel [Opinion]

I HAVE NO ANIMOSITY TOWARD CARS AND PLANES. For decades I have depended for local travel on a succession of reliable Honda Civics, and for years I have flown intercontinentally at least 100,000 miles annually. At these two extremes-a drive to an Italian food store, a flight from Winnipeg to Tokyo-cars and planes rule. • Energy intensity is the key. When I'm the only passenger in my Civic, it requires about 2 megajoules per passenger-kilometer in city driving. Add another passenger and that figure drops to 1 MJ/pkm, comparable to a half-empty bus. Jet airliners are surprisingly efficient, commonly requiring around 2 MJ/pkm. With full flights and the latest airplane designs, they can do it at less than 1.5 MJ/pkm. Of course, public-transit trains are far superior: At high passenger loads, the best subways need less than 0.1 MJ/pkm. But even in Tokyo, which has a dense network of lines, the nearest station may be more than a kilometer away, too far for many old people. • But none of these modes of transportation can equal the energy intensity of intercity high-speed trains. These are typically on routes of 150–600 km (about 90–370 miles). Older models ofJapan's pioneering bullet train, the shinkansen ("new main line"), had an energy intensity of around 0.35 MJ/pkm; more recent fast-train designs-the French TGV and German ICE-typically need just 0.2 MJ/pkm. That's an order of magnitude less than airplanes. • No less important, high-speed trains are indeed fast. The Lyon-Marseille TGV covers 280 km (170 miles) in 100 minutes, downtown to downtown. In contrast, scheduled commercial flight time for about the same distance-300 km from New York's LaGuardia Airport to Boston's Logan Airport-is 70 minutes. Then you must add at least another 45 minutes for checking in, 45 minutes for the ride from Manhattan to LaGuardia, and 15 minutes for the ride from Logan to downtown Boston. That raises the total to 175 minutes.