A Compact EBG Structure With Etching Spiral Slots for Ultrawideband Simultaneous Switching Noise Mitigation in Mixed Signal Systems

In this paper, a compact electromagnetic bandgap (EBG) structure for mitigating simultaneous switching noise (SSN) in high-speed mixed signal systems is proposed. Only one spiral slot is etched on the square patch, which constitutes the unit cell of the presented EBG pattern. The equivalent circuit model is developed to interpret the mechanism of the proposed power distribution network structure. By etching slot in the square patch of the EBG pattern, a high impedance is provided for prohibiting the SSN propagation. Furthermore, the capacitance is increased correspondingly, which can enlarge the bandwidth of the SSN suppression performance. An ultrawideband SSN suppression property is achieved from 0.35 to 20 GHz under the suppression level of -40 dB. In comparison with the traditional multiturns spiral EBG structure, not only the bandwidth but also the rejection level can be improved significantly with the presented design. Moreover, the SI performance is investigated, and the corresponding improvement measure is presented. Good agreements are observed between the simulation and measured results.