Improvement in Output Characteristics Using a Resonator and Passive Rectifiers in Vibration Generators

Energy harvesting has attracted increased attention recently. Energy sources are present all around us, such as, mechanical vibrations, stress, strain, waste heat, sunlight or room light, electromagnetic rays, and chemical or biological sources. Vibration generators based on piezoelectric elements have been highlighted as low-power sources; however, their output power is very low, around the milliwatt or microwatt level, and thus, improving their performance is necessary to make the generated power usable. This paper investigates the use of passive devices to improve output characteristics of the vibration generators. The proposed circuits are a resonator and a passive rectifier. The proposed resonator consists of a parallel inductor and capacitor for LC resonance. The LC resonance equivalently reduces the internal capacitor of the piezoelectric elements. As a result, the output voltage and power are increased compared with that of conventional circuits. In addition, a boost-type current-improving passive rectifier is applied as the passive rectifier. The validity of the proposed circuit is numerically and experimentally verified.