Coordinated Elimination Strategy of Low Order Output Current Distortion for LC-Filtered DFIG System Based on Hybrid Virtual Impedance Method

This paper proposes a coordinated control strategy for the rotor-side converter (RSC) and the grid-side converter (GSC) of an LC-filtered doubly fed induction generator (DFIG) under distorted grid voltage condition, to eliminate the distortion of the total output current (including the stator current, the GSC current, and the filter capacitor current). For an LC-filtered DFIG connected to a distorted grid, the low-order current harmonics can freely flow into the filter capacitor thereby polluting the total output current, even when the stator current and the GSC current are both controlled as sinusoidal. Although this problem can be addressed by measuring the output current or the capacitor current, the extra current sensors are undesired in industrial applications. In this paper, a novel hybrid virtual impedance method is implemented in both the RSC and the GSC, to reshape the parallel impedance of the stator, the GSC and the filter capacitor to nearly infinite for low-order harmonics, thus, the freely flowing output current harmonics can be mitigated. Meanwhile, the low-order current harmonics required by the output current compensation can be flexibly distributed between the stator and the GSC according to their operating conditions, to disperse the side-effects on the drive train and the GSC, thereby better protecting the whole system. The effectiveness of the proposed strategy is theoretically analyzed and verified with both simulation and experiment.