A Hybrid Dual-Path Step-Down Converter with 96.2% Peak Efficiency Using a $250\text{m}$ μ Large-DCR Inductor

A dual-path step-down converter (DPNC) is presented for achieving high power efficiency in mobile PMICs. The proposed DPNC supplies a load current (I_LOAD) via two parallel paths using a hybrid structure with one inductor and one flying capacitor, solving an intrinsic problem of conventional buck converter topology (CBT) which is a significant power loss from a large DCR of inductor (R_DCR). Therefore, DPNC not only achieves a high efficiency, but also reduces a heating problem. Additionally, DPNC can shrink a volume of PMIC set with a low manufacturing cost, by alleviating a RDCR specification of inductor. Although a 250mΩ of large-DCR inductor was used, this paper achieved a 96.2% of peak-efficiency, and the total loss from parasitic resistance of external components was reduced to up to 30% compared to CBT. Furthermore, DPNC achieved much higher efficiency not only in a wide ILOAD range, but also in a wide V_OUT/V_IN range.