Esaki Diodes Based on 2-D/3-D Heterojunctions

Esaki diodes based on interband tunneling have the characteristics of negative differential resistance (NDR) and ultrafast transient time, which lead to broad applications including oscillators, multivalue memories, and terahertz detectors. In this paper, we present the first demonstration of Esaki diodes based on 2-D/3-D heterojunctions-more specifically, chemical vapor deposition MoS
₂
on degenerately doped silicon. As compared to traditional 3-D heterostructures, these 2-D/3-D heterostructures have the following advantages: dislocation-free 2-D crystals even when the lattices are mismatched, dangling bond-free surface, and capability for large-scale synthesis at low cost. In this paper, monolayer, bilayer, and trilayer MoS
₂
are synthesized directly on degenerated Si substrate, forming the ultraclean heterostructures without surface contamination from tape and resist. Based on these pristine heterostructures, we are able to observe prominent NDR effect at room temperature. This NDR effect is attributed to the degenerately p-type doping in silicon and the natural n-type doping in MoS
₂
. We also found that the peak voltage corresponding to the local maximum tunneling current depends on the MoS
₂
thickness. While MoS
₂
is changing from the monolayer (0.7 nm) to bulk (9.5 nm), the peak voltage increases from 0.8 to 1.6 V. This phenomenon can be explained by the energy-level differences between the monolayer and bulk MoS
₂
. This paper provides the experimental groundwork for the synthesis of transition metal dichalcogenides on degenerately doped Si substrates and opens up new and exciting opportunities for electronic applications of 2-D/3-D heterostructures.